@Will That is bad news, to read, "We have plans for adding a way for Moderators to curate the best content on the site, it would be more formal than simply adding a tag. "

Moderation, by a select few hand-picked by Maplesoft, is an innappropriate way in which to curate the best content. There are lots of places in which this is described as a community driven site, and where the rating/ranking schemes are described as community driven. But curation of best content by a select Moderation group goes hard against that, and is antithetical to those stated community-driven goals.

Moderation is fine for controlling spam, removing duplicate posts, adjusting wrongly slotted items, keeping the interpersonal tone polite, etc. But it goes against the widely stated site-vision that the best will bubble to the top.

If you really want to foster an arena of free and community-driven contribution then you have to be very careful about controlling it. Keep in mind that the recent mapleprimes redesign of this site has, in effect, brought about a considerable moderating effect by the site adminitration. (Ie, control over how posts are viewed, followed, ranked, and labelled have all been forcibly changed.)

Curation powers based upon reputation may not be perfect, but at least one can trace it back to the community in some way -- because the community assigns the reputation.

Could an admin please convert this Post to a Question, so that we can up-vote djc's answer (which, btw, is of his usual high quality).

Thanks for the explanation, Will. That's pretty much how I myself had understood it as working.

But for me, I often really do want the "all" view, as I find that I keep going back to threads even when they haven't changed. For example, I'll read some posts and questions during the day, perhaps, and want to respond in the evening or the next day. I think that I do that much more often than I respond immediately upon reading. But by then the posts might have scrolled off of the "Active Conversations" view from the main page (and that link is broken, so I can see farther than what's show on the front page). And I want the posts and questions merged together, etc.

The "unread" view is a neat mechanism, and works as I'd guessed. But I find that I regularly want to look at the complete history of the past day or so, regardless of (and unfiltered by) whether I've already viewed some items.

I appreciate all the effort you've put into this site. Thanks for those other fixes and updates and comments you made earlier today, by the way.

acer

Ouch!

I find it hard to disagree with Jacques's points.

acer

Ouch!

I find it hard to disagree with Jacques's points.

acer

@Alejandro Jakubi Thanks Alejandro. PDEtools, the CAS within a CAS. ;)

More seriously, though, I suspect that the U from LU factorization (or  maybe the U1 from Turing factorization) might be a wise way to go, as it may already allow for Normalizer and Testzero during pivoting, etc. Finding the cases in the parameters by examining the zeros of the diagonal elements, and then constructing corresponding restrictions on the RHS entries doesn't look impossible.

What I was thinking though, was more this: this kind of case solving is important and useful, and the linear system class cannot be the hardest class for attempting it.

acer

@Alejandro Jakubi Thanks Alejandro. PDEtools, the CAS within a CAS. ;)

More seriously, though, I suspect that the U from LU factorization (or  maybe the U1 from Turing factorization) might be a wise way to go, as it may already allow for Normalizer and Testzero during pivoting, etc. Finding the cases in the parameters by examining the zeros of the diagonal elements, and then constructing corresponding restrictions on the RHS entries doesn't look impossible.

What I was thinking though, was more this: this kind of case solving is important and useful, and the linear system class cannot be the hardest class for attempting it.

acer

So, how can one get a robust method to get such piecemeal solutions, organized by special values of parameters (and whatever constraints on the RHS entries ensue)?

A piecewise result might be nice.

> M:=Matrix([[1,0,0,b1],[2,k,0,b2],[m,k,1,b3]]):

> LinearAlgebra:-LinearSolve(M);

                          [          b1          ]
                          [                      ]
                          [       2 b1 - b2      ]
                          [     - ---------      ]
                          [           k          ]
                          [                      ]
                          [-m b1 + b3 + 2 b1 - b2]

> solve(LinearAlgebra:-GenerateEquations(M,[x1,x2,x3]),
>       [x1,x2,x3],AllSolutions,ConditionalSolutions);

   [[                2 b1 - b2                             ]]
   [[x1 = b1, x2 = - ---------, x3 = -m b1 + b3 + 2 b1 - b2]]
   [[                    k                                 ]]

> solve(LinearAlgebra:-GenerateEquations(eval(M,[k=0,b1=b2/2]),[x1,x2,x3]),
>       [x1,x2,x3]);

            [[     1                        1     ]]
            [[x1 = - b2, x2 = x2, x3 = b3 - - m b2]]
            [[     2                        2     ]]

How can that last result be nicely obtained, without having to know the special value k=0 and the constraint b1=b2/2 in advance?

Of course, throw just a few more unknowns into Matrix M and the result might quickly become huge and unwieldy. But for smaller, simpler examples it migh tbe nice to have.

acer

So, how can one get a robust method to get such piecemeal solutions, organized by special values of parameters (and whatever constraints on the RHS entries ensue)?

A piecewise result might be nice.

> M:=Matrix([[1,0,0,b1],[2,k,0,b2],[m,k,1,b3]]):

> LinearAlgebra:-LinearSolve(M);

                          [          b1          ]
                          [                      ]
                          [       2 b1 - b2      ]
                          [     - ---------      ]
                          [           k          ]
                          [                      ]
                          [-m b1 + b3 + 2 b1 - b2]

> solve(LinearAlgebra:-GenerateEquations(M,[x1,x2,x3]),
>       [x1,x2,x3],AllSolutions,ConditionalSolutions);

   [[                2 b1 - b2                             ]]
   [[x1 = b1, x2 = - ---------, x3 = -m b1 + b3 + 2 b1 - b2]]
   [[                    k                                 ]]

> solve(LinearAlgebra:-GenerateEquations(eval(M,[k=0,b1=b2/2]),[x1,x2,x3]),
>       [x1,x2,x3]);

            [[     1                        1     ]]
            [[x1 = - b2, x2 = x2, x3 = b3 - - m b2]]
            [[     2                        2     ]]

How can that last result be nicely obtained, without having to know the special value k=0 and the constraint b1=b2/2 in advance?

Of course, throw just a few more unknowns into Matrix M and the result might quickly become huge and unwieldy. But for smaller, simpler examples it migh tbe nice to have.

acer

This is homework, yes?

Were you looking for an easy way for Maple to get the two results?

Or were you looking for hints about how to show it "by hand", without Maple?

Or...?

acer

I love submitting, only to find that I've been scooped!

But if it's by Robert, I feel less bad about it.  ;)

acer

I love submitting, only to find that I've been scooped!

But if it's by Robert, I feel less bad about it.  ;)

acer

It seems that you can get it from the alternate maplenet "save" url, even though it is .mws (which surprised me!).

See here.

acer

Ok, thanks Robert. An optional keyword parameter to Statistics:-NonlinearFit might do, such as {globalsearch::truefalse:=false}. The interactive Optimization assistant has something like this, a checkbox for global searching (applied to NLP solving, say). So it would be nice if the non-interactive components which use Optmization, such as Fit and NonlinearFit, could also get such options.

acer

Ok, thanks Robert. An optional keyword parameter to Statistics:-NonlinearFit might do, such as {globalsearch::truefalse:=false}. The interactive Optimization assistant has something like this, a checkbox for global searching (applied to NLP solving, say). So it would be nice if the non-interactive components which use Optmization, such as Fit and NonlinearFit, could also get such options.

acer