Can anyone correct me, what's wrong with it.

Help_solution.mw

Hello,

I'm experimenting the RSA encryption algorithm and in one example, I need to calculate (m^e) mod n where :

n=4142074788597595058238933087635402958555715420375128103710780511

m=65108105099101044032

e=3467995563410655813589059428902496618444213189544232426283402949

and I receive : Error, numeric exception: overflow

Even though these are large numbers, modular arithmetic algorithms should be able to deal with that.

Why is it not the case ?

NB : One of the mathApps in the category Computer Science is "RSA Encryption" and proves to be fairly comfortable with such large numbers, no overflow!

V1 := [1.666666667, 1.983050847, 2.372881356, 2.768361582, 
    3.380681818, 3.977272727, 4.767045455, 5.755681818, 
    6.937500000, 8.244318182, 9.801136364, 0.2971428571, 
    0.6914285714, 1.085714286, 0.3942857143]
dV1 := [0.03315280331, 0.03866282527, 0.04508264551, 
   0.05165406892, 0.06212371278, 0.07219635124, 0.08557994498, 
   0.1023815798, 0.1225076192, 0.1447933406, 0.1713677762, 
   0.01380612592, 0.01872473080, 0.02454205309, 0.01488350319]
V2 := [17/10, 2, 12/5, 14/5, 17/5, 4, 24/5, 29/5, 7, 42/5, 10, 3/10, 7/10, 11/10, 2/5]
dV2 := [0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0]

Hey,

i have trouble adding error bars to my plots despite experimenting with it for hours. I tried using ErrorBars but i never get close to what i need. What i have is V1 (values for y) and V2 (values for x) to produce a ScatterPlot which works alright. What i need is something like this: .

For the errors in x and y-direction i have 2 lists dV1 (y errors) and dV2 (x errors).

This is my first post and i´m a bit in a rush so please excuse me for any mistakes i may have made.

Calculation of these integrals takes much time.

Is there a way to reduce the time?

MY_SYSTEM.mw

I have this procedure to perform a Boole-Mobius Transform. I took me quite a while to figure out. Whereas it works, I wonder how it should be done efficiently? The document is also attached which shows the steps I went through to derive the procedure. I can't get the document to display.

BooleMobiusTransform := proc(V) 
local n, im, istep, jm, h, istart, i, j, k; n := ilog2(numelems(V)); im := 2^n/2; istep := im; jm := 1; h := 2^n; 
for k to n do
 istart := 1; 
for j to jm do 
for i from istart to im - 1 + istart do 
V(istep + i) := (V[istep + i] + V[i]) mod 2;
 end do;
 istart := istart + h; 
end do;
 im := 1/2*im; istep := 1/2*istep; jm := 2*jm; h := 1/2*h; 
end do; 
return V; 
end proc

Boole-Mobius_Transform.mw

DEAR SIR,

GOOD EVENING.

HOW TO FIND THE AREA BETWEEN THE CURVES  USING MAPLE? 

How I can edit and apply the following conditions to my plot functions 

`######   I want to change q  (starting from 0.3) from 0.3 by .001 to 0.377 and plot 2D (u-q) ,(v,q), (u,v) and  plot3D (u,v,q)`

`######   I want to change q (starting from 0.37727) from 0.37727 by .001 to 0.390059 and h from 0.1 by .001 to 0.138462  and plot 2D (h-q)  and  plot3D (u,h,q),(v,h,q)`

I couldn't attach my file here, so I uploaded that here

https://drive.google.com/file/d/17purRxEdDqrTJeFDcF1-d9J7b3LkuJnF/view?usp=sharing

Hi,

I am studying nonlinear differential equations, and came across an interesting one on maple's help page.  I made a post about this equation already, but I have decided to make a new post because the topic is slightly different than from the previous post.

The topic of this post is:

"Can numerical methods and exact, implicit techniques find false solutions?"

To make the discussion clearer, the rest of this post can be found in the maple file I created.

Hi to all community. I am trying to integrate a lengthy-expression but could not get the result after waiting of 1 and 2 hours even. is there any way to control such integration

Integration_Help.mw

A very simple question (by example):

Consider two polynomials g and h:

with(PolynomialTools):

g:=FromCoefficientList([1,2,3],x);

h:=FromCoefficientList([4,5,6,7],x);

What is the syntax for computing the composition of g with h? (As a polynomial.)

For instance, I would like to use CoefficientList on the result.

I know the @ operator and the subs command and have tried using them in various ways, but with no success.

(Of course, my question is general; the above is just an example.)

---

Edit: Additional question (which is my real question):

I'm writing a procedure that takes two polynomials g and h, and in which I define an unknown polynomial f. I want to compute its coefficients so that

f "composition" g = h

I write:

fCoeff:=seq(a[i],i=0..t) (to define the unknown coefficients. I can compute t.)

f := FromCoefficientList([fCoeff],x);

Then I would like to do something like:

comCoeff:=CoefficientList(f "composition" g,x)

If I have this, then I know how to solve for the unkown coefficients in f.

Given a metric, to compute quantities in the NP formalism one needs to specify a null tetrad. In the various examples in the help pages, sometimes the tetrad is specified simply as a list of 4 vectors, e.g., NT := [...] and sometimes evalDG is applied as in NT := evalDG({...]). Using the first format, Maple accepted NT as argument in NPSpinCoefficients but  NPCurvatureScalars(SpinCoefficients,NT) complained that the second argument wasn't a list of four vectors. When I used the second format, both commands returned the expected results. Why the difference?

RobinsonTrautmanSpinDG.mw

How I can plot3d function s. in the domain x ,y from -1300 to 200.

Thanks

if.mw
 

Download if.mw

Hello. I want to use the command verify but with two variables. For example:

verify(x^2 + y^2, 0, {'greater_equal'});

but I get FAIL as an answer. I tried adding before the verify command assume(x, 'real'); assume(y, 'real');

but notihng changed.

Thanks for any help.

Dear people in mapleprims,

I haven't used maple for a long time.
By the way, I tried to modify a denominator part in an fractional expression, but I couldn't.

Original expression is 

a:=-(I__22-X__2)/(I__11*I__22-I__11*X__2-I__12*I__21-I__22*X__1+X__1*X__2);

#And, I want to change this to the form

b:=(X__2-I__22)/((x__1-I__11)*(X__2-I__22)-I__12*I__21);

How can I do this?

Thank you in advance.

taro yamada

Hi,

I have managed to create the following plot.  It won't plot on the site's plotter:

fieldplot([1, y^2 + x], x = -10 .. 10, y = -6 .. 6, fieldstrength = fixed, color = abs(y^2 + x + 1))

I am trying to assign a colour gradient to the different vectors based on vector magnitude.  In the color option, I entered color= expresssion for the magnitude of the vectors

This only half worked.  It currently scales the colours such that the largest and smallest vectors are the same colour.  How do I assign a gradient such that the small magnitude vectors are one colour, and they then transition to another colour as their magnitude gets larger?