Can maple solve maximization problem like

q := proc (a, b, c) options operator, arrow; .2*b+.1*c end proc;
print(`output redirected...`); # input placeholder
(a, b, c) -> 0.2 b + 0.1 c
w := proc (a, b, c) options operator, arrow; .7*a+.1*c end proc;
print(`output redirected...`); # input placeholder
(a, b, c) -> 0.7 ab + 0.1 c
e := proc (a, b, c) options operator, arrow; .7*a+.2*b*c end proc;
print(`output redirected...`); # input placeholder
(a, b, c) -> 0.7 a + 0.2 b c

with(Optimization)

Maxmize(int(min(100+(.7*a+q)*(1/2), a), q)+int(min(100+(.2*b+w)*(1/2), b), w)+int(min(100+(.1*c+e)*(1/2), c), e)-a-b-c-ab-ac-bc)

Error, (in Optimization:-NLPSolve) cannot convert procedures to piecewise

Thanks alot if you can help me.Urgent! Really appreciate.

Hi there,

I used the following plot command in maple13.

with(plots):

implicitplot(abs(x)+abs(y)=2, x=-2..2, y=-2..2, scaling=constrained)

But the output(square) is not complete at vertices.In fact at the vertex the graph is like a trapezoid.

Any help will be appreciated.

Yegan

> restart;
> with(plots);
> Eq1 := diff(f(eta), eta, eta, eta)+f(eta)*(diff(f(eta), eta, eta))-2*(diff(f(eta), eta))^2-M^2*(diff(f(eta), eta)) = 0;
/ d / d / d \\\ / d / d \\
|----- |----- |----- f(eta)||| + f(eta) |----- |----- f(eta)||
\ deta \ deta \ deta /// \ deta \ deta //

2
/ d \ 2 / d \
- 2 |----- f(eta)| - M |----- f(eta)| = 0
\ deta / \ deta /
> Eq2 := 1+(4/3)*R*(diff(theta(eta), eta, eta))+Pr*(f(eta)*(diff(theta(eta), eta))-(diff(f(eta), eta))*theta(eta)) = 0;
4 / d / d \\
1 + - R |----- |----- theta(eta)||
3 \ deta \ deta //

/ / d \ / d \ \
+ Pr |f(eta) |----- theta(eta)| - |----- f(eta)| theta(eta)| = 0
\ \ deta / \ deta / /
> bcs1 := f(0) = S, (D(f))(0) = 1+L*G, (D(D(f)))(0) = .1, f(6) = 0;
f(0) = S, D(f)(0) = 1 + L G, @@(D, 2)(f)(0) = 0.1, f(6) = 0
> fixedparameter := [S = .1, M = .1];
[S = 0.1, M = 0.1]
> Eq3 := eval(Eq1, fixedparameter);
/ d / d / d \\\ / d / d \\
|----- |----- |----- f(eta)||| + f(eta) |----- |----- f(eta)||
\ deta \ deta \ deta /// \ deta \ deta //

2
/ d \ / d \
- 2 |----- f(eta)| - 0.01 |----- f(eta)| = 0
\ deta / \ deta /
> fixedparameter := [R = .1, Pr = .7];
[R = 0.1, Pr = 0.7]
> Eq4 := eval(Eq2, fixedparameter);
/ d / d \\ / d \
1 + 0.1333333333 |----- |----- theta(eta)|| + 0.7 f(eta) |----- theta(eta)|
\ deta \ deta // \ deta /

/ d \
- 0.7 |----- f(eta)| theta(eta) = 0
\ deta /
> bcs2 := theta(0) = 1+T*B, (D(theta))(6) = B, theta(6) = 0;
theta(0) = 1 + T B, D(theta)(6) = B, theta(6) = 0

> T := .1; B := .1;
0.1
0.1
> L := [0., .1, .2, .3];
[0., 0.1, 0.2, 0.3]
> for k to 4 do R := dsolve(eval({Eq3, Eq4, bcs1, bcs2}, L = L[k]), [f(eta), theta(eta)], numeric, output = listprocedure); Y || k := rhs(R[2]); YL || k := rhs(R[3]) end do;
Error, (in dsolve/numeric/bvp/convertsys) too many boundary conditions: expected 6, got 7
> plot([YL || (1 .. 4)], 0 .. 6, 1 .. -.2, labels = [eta, diff(f(eta), eta)]);

Consider the function

The above definition may result in four cases depening on r and x.

Can Maple calculate automatically all possible cases and the corresponding Maxima, Minima and Values at intervals limits?

The system :

I am trying to recreate journal work for validating using another computer program so I am trying to use maple to solve the ODE, based on further research I found using laplace might be the best but I am having some trouble.

eq8:=d*(n(t)+C(t))/drho = -rho(t)/(l*alpha*K_c)

given the initial conditions of:

ICs:= n(0) = n_0, rho(0) = rho_0, C(0) = (beta-rho_0)*n_0/(l*lambda)

therefore: 

equation9 := dsolve({equation8, ICs}, {C(t), n(t)}, method = laplace)

Following this process I get the error: 

Error, (in dsolve) invalid initial condition

According to the journal work the solution I am looking for is: 

C(t)=-n(t)+(rho_0^2+rho(t)^2)/(2*l*alpha*K_c)+((Beta+l*lambda-rho_0)*n_0)/(l*lambda)

is there something that I'm doing wrong or missing? 

Any help would be greatly Appreciated! 

I want to simulate Inelastic collision

There has 2 ball which I can change  Quality and Radius.

one ball  move to another stirless ball with diferent angle

I have two Reissner Nordstrom black holes that are near extreme. How do I show they move? 

When i copy expression and past it in word, i can change the size of the picture whitout loosing the detials.

How can i export the expression to a file, such that when i will open it in word i could change the size without loosing details? much thnks :)

Dear Maple users,

My problem is as follows:

I have a factor base [2,3,5,7,11,33,34,35,36,37,38,39,40]

The numbers from 2 till 11 are primes, the rest is not. 

Then I have to factor (H+c1)(H+c2) in numbers of the factor base , where c1 and c2 go from 1 to some pre-defined limit. H=32 in my case.
And then I have to put the powers of the numbers of the factor base in a matrix. For example: (H+1)(H+1)=33² but also (H+1)(H+1)=3²*11².

That will become in matrix form [0 , 2, 0, 0, 2, 0, 0, 0, 0, 0, 0, 0, 0 ] but also (!) [0 , 0, 0, 0, 0, 2, 0, 0, 0, 0, 0, 0, 0 ].

This is not what I want! I want no double representations....

What I want is that (H+c1)(H+c2) should be represented in primes in the matrix if possible and else just represented as the other numbers.

hope you guys can help me!

st6.mw,st7.mwI want to obtain the analytical solution for this PDE by maple       . But I can not do it. Please help me

((d^2)T/dx^2)+ ((d^2)T/dy^2)+ ((d^2)T/dz^2)=-A*Q(x,y,z)

Where   0 <x<a ,  0 <y<b  ,  0 <z<l

With the boundary conditions:

(dT(0,y,z)/dx)=n-T(0,y,z)    (dT(a,y,z)/dx)=n-T(a,y,z)   (dT(x,0,z)/dy)=n-T(x,0,z)

(dT(x,b,z)/dy)=n-T(x,b,z)     (dT(x,y,0)/dz)=n-T(x,y,0)    (dT(x,y,l)/dz)=n-T(x,y,l)

where n is constant and A is set of parameters.

Hi,

I have two all 1.-1  square matrices and want to test whether they are equivalent or not. Can anyone help me with details?Thanks in advance

Hello everybody

I am working on the bending of FGM plate, and I just used maple for the calculation functions of my problem of the bending of FGM plates.

Can any from the members of mapleprimes one help me to write Navier's equation include below for the bending of the plate because I am new in using Maple 18

alfa=m*pi/a, beta=n*pi/b with m=1,3,5..100 and n=1,3,5...100

Thank's for all