Is there a routine available to derive the variable (i.e for any given z) for the standard normal loss function, L(z)?

If we know the value of L(z), how can z be determined?

mathcontainerUses_Doubt.mw
 

Download mathcontainerUses_Doubt.mw

Can any one state the uses of mathcontainer?

1. It can store only one algebraic expression at a time?

2. Can it handle list of algebraic expressions?

3. Can it store list data points (x,y) for a list of curves?

4. Can there be any use for click to edit this component?

More than a simple Yes or No a simple example for each yes answer would be very helpful.

I enclose a document with list of coordinates for for three curves, expression for curve fitting, three expressions derived for these plot points (coordinates), a command for optimum y for each of the three curves (maximum y and corresponding x value), 

Thanks for answering.

Ramakrishnan V

Hey there. 

I recently had to install maple 2017, because the licensens for 2016 had expired. 

And in the new version, whenever i want to copy a matrix from a result, it gives me an _rtable, and a number. The result is the same, but it makes it harder to read and i am not able to edit values in this copied matrix. 

How do i change this?

I have an two arrays of elements Op1[i,j] with -5 <= i,j <= 5 and Op2[i,j] with 5<=i,j<= 35 . When I use surfdata like

surfdata({0p1,Op2})

it produces a plot with both the range of Op1 and Op2 between 0 and 1 (see Fig1).

I tried surfdata({0p1,Op2},-5..35,-5..35) but this only gave the range of the figure from -5 to 35, -5 to 35 but with both plots scaled so that they cover the whole range(see Fig2).

How do i make surfdata use different ranges on the same plot for both arrays?

Please can someone help with maple comand to obtain Jacobian elliptic functions particularly in code editing region?

I have an excel data file where data are in floating points of different decimals. I have made the following command which worked once. Second time it gives an error stating that one argumnet is expected, but receives three. How do I solve this problem. I want the data to be imported to data table in two decimal formats.

Export_TO_Maple1.xlsxExport_TO_Maple2.xlsxDOUBT.mw

M1 := Import(evalf[2]("E:/A_PhD2017/Export_TO_Maple1.xlsx", "Sheet1", "A2:U8"));

Is it possible to compare two maple files, given that there are small changes between them?

in the steps below, it is not fluent to do, and appear diff(1,t)

KineticEnergy := 1/2*m*diff(x(t), t)^2;
PotentialEnergy := subs(x=x(t),int((1/R^2)^2,x));
Action := KineticEnergy - PotentialEnergy;
AA := diff(Action,x(t)) - diff(diff(Action, diff(x(t),t)),t) = 0 <-------- Dsolve this
AA := eval(subs(diff(1,t)=0,diff(Action,x(t))) - Diff(subs(p=Diff(x(t),t),diff(subs(Diff(x(t),t)=p, Action), p)),t)) = 0
dsolve(AA, x(t));
 

Where R is constant

The following image shows a .mw file on two monitors (1 = right side) (2 = left side).  

Distortion occurs when I try to drag-and-drop an open file from monitor 1 to monitor 2.  Transfer from one monitor to another works fine on all other applications (.pdf, .docx, web stuff, graphic files like .png, and .xlsx.  Only .mw files distort when I try to open them or move them to monitor 2.  I was able to move, open, etc. any .mw file for over a year, then a couple of days ago the files started to distort.  I had a 32-bit version of Maple (Maple 2015.2 build ID 1097895—deleted it.  Also deleted and reinstalled Maple 2015.0, build 1022128.  I checked and updated my video card, updated the 2-monitor settings on Windows 7.  All this to no avail, the Maple 2015.0 program works on monitor 1, but it can not be opened or dragged-and-dropped to monitor 2.

Help, advice, suggestions welcomed—many thanks in advance.

Les

Hello.

I have been trying to create a code to solve a structure by using FEM, but I keep getting an error that stops me from moving on.

Everytime I run my code, Maple gives me the error in the Title of my question:
"Error, number of indices exceeds rank"

Unfortunately I can't find any help in Maplesoft support for such error, and I need immediate help for that.

Can someone help me with that? Should I post my entire code?

Thanks!

Hi everyone, 

I often get the error 'cannot save points as a float matrix' while I'm trying to plot with the spacecurve command.

loodl2 is a 4 component vector, loodl2c is the 3 component variant.

loodl2:=T1.<loodl,1>: loodl2c:=<loodl2[1], loodl2[2], loodl2[3]>
loodlpl:=spacecurve(loodl2c, k=-10..10, color=red):

also with this syntax:
loodl2c:=loodl2[1..3]

and this syntax:

l2c1:= 2*k: l2c2:=0, l2c3:=8-k:
spacecurve([l2c1, l2c2, l2c3], k=-10..10, color=red):
Warning, unable to evaluate the function to numeric values in the region; see the plotting command's help page to ensure the calling sequence is correct

It will only plot if I do this:
loodl2c:=<2*k, 0, 8-k>
Can someone help me?
 

I am trying to use the element properties Maple has in its ScientificConstants package. I am running into problems with the density of gaseous elements:

with(ScientificConstants);

Units:-UsingSystem(); # returns SI as expected

GetValue(Element('Si',density)); # returns 2329.0000 [kg/m^3] which is 2.329 g/cm^3, which is correct

GetValue(Element('H',density(gas))); # returns 88 [kg/m^3], which is incorrect.

PDG gives the density of hydrogen as 8.376E-5 g/cm^3, which is 0.08376 kg/m^3.  

Even more crazy for Krypton:

GetValue(Element('Kr',density(gas))); # returns 3677.000 [kg/m^3]. Heavy little buggers, these Kypton atoms! Should be 3.486 in the same units.

What gives? Am I missing something here?

Mac Dude

In matlab there is a sqrtm() command to calculate the square root of square matrices, I want to know if there is a similar command in Maple to do same thing?

What is the meaning of the "0" in the series expansion

series(x/(-x²-x+1), x = 0); ( this is the Maple command)
                   
              x + x²  + 2 x³  + 3 x⁴ + 5 x⁵  + O(x⁶)  This is the results

This is use in Maple I've seen quite a bit for series. I assume the the series continues on. But I am not sure

Also is there any listing of what some of the symbols that maple uses???
 

Is there a way to specify different colors for different output variables? For example, if x,y, and z appear in the entire document as variables, I want x to be red, y to be blue, and z to be green whenever an output is displayed.

Thanks