Sliding Patio Doors Repair
Patio doors that slide open are ideal for enjoying your outdoor space, but they can be difficult to open and close. This can be due to many issues like dirty tracks or poorly aligned sliders.
Clean the track first and Lubricating the rollers. You can also use the adjustment holes on the bottom of the movable panel to adjust the alignment of your rollers.
Tracks that are damaged or dirty
A dirty or damaged track can cause the door to not slide properly. Over time, dirt, grit, and even rust could build up and block the track from being able to move smoothly. A gentle detergent and a brush will suffice. It's best to perform this task frequently to ensure the smooth operation of your door, and to avoid the need for expensive repairs later on.
A door that is leaky is another common issue that requires prompt attention to avoid mold growth, water damage and structural damage. The issue is usually caused by worn weather strips and misaligned door. This can be corrected by replacing the old weather stripping and aligning the doors.
Rollers that bounce off the track are a common issue that can be repaired with a simple DIY work. This task can be difficult so you may need a helper to assist you. To reposition the rollers, stand inside the house and lean one of the panels towards you. To prevent the panel from falling, put it on sawhorses when it's been removed from the bottom track. Then, loosen the screws that hold each roller in place and take them off with a screwdriver. You can now remove any dirt that is caught between the wheel and the tracks. Clean each wheel by rubbing denatured alcohol on a cloth. Reposition the wheels on their tracks and attach them once more.
It's possible to straighten a bent section of track using a mallet made of rubber and a piece of wood. However, if the bent section is near the hinges and has the potential to cause further damage, you'll be better off calling a professional to ensure safety.
Rollers that are not aligned
If your sliding door is having a problem sliding, it is likely that the rollers have been misaligned. The wheels may be dirty or rusted and their bearings are worn down. This friction causes the door to catch and grind when it's opened or closed. It can also cause sounds that squeak.
Fortunately it's an easy fix. You don't have to remove the door to get at the wheels, since they are mounted on a bracket that's adjustable. Find the holes for adjustment (usually on either side of the frame) and make use of a screwdriver to turn the screws that control the wheels. A clockwise rotation of the screw raises the wheel while a counterclockwise rotation lowers it. Continue adjusting until the door moves effortlessly and quietly when it is opened or closed.
It is important to adjust the wheels prior to adjusting the latch. To ensure that the lock functions correctly, the latch hooks must be aligned with the strike plate. If you don't take this step the latch could accidentally open or shut even when you're not in the room.
Sliding patio door are an investment. Maintaining them in good condition will ensure the safety of your family. By fixing common issues such as damaged tracks, rollers or handles, you can avoid expensive repairs in the future. If you need help with your patio doors, get in touch with our team. We can assess your needs for repair of your sliding patio door and help you keep it in top condition. Our experts can also help with any replacement parts that you may need.
The door frame is sagging or damaged
Sliding patio doors are a wonderful addition to any home. They offer a stylish and practical alternative to hinged or swing-open patio door options. Like any other hardware item sliding patio doors are prone to develop problems with time. Fortunately, a lot of these issues are simple to fix with a bit of DIY know-how.
patio door repair in the frame is a typical problem with sliding patio doors. This could be caused by a variety of reasons, including a rollers or tracks that are not aligned properly, a damaged track or door, or a bowing door frame. In most cases the root of the problem can be easily fixed by removing the door and re-attaching the track or rolling elements. This must be done with extreme caution to avoid cause damage to the track or frame.
In some instances, it might be required for the entire track to be replaced. This can be accomplished quickly and easily with the universal kit that is available in all major hardware stores. These kits are simple to install and will have your door operating perfectly in no time.
It is important to check your sliding door's frame and hardware for signs of wear and tear, such as loose bolts or screws. This is a straightforward and effective DIY patio maintenance step that can be accomplished with an electric screwdriver. It is also essential to lubricate the tracks and rollers of your patio door to ensure smooth operation and to keep them from wearing out prematurely.
Patio doors are often the primary entry point to the backyard and outdoor living area for a majority of homeowners. To ensure comfort and security in the home, it's important that they function correctly. By taking the time to implement these easy DIY maintenance steps homeowners can extend the life span of their sliding patio doors, and avoid costly repairs or replacements.
Handle is not working properly
Sliding patio doors are the perfect way to access your backyard and enter your home, but they aren't always easy to operate if they become damaged or misaligned. A defective handle can cause the door not to open or close properly. Fixing a loose handle can be done at home.
In patio doors repairs near me for a loose grip is a result of screws that have slipped out of the backplate. To fix the problem tighten the screws on the inside handle using the help of a screwdriver. If patio door repairs find that the handle is loose, it may be an indication that the threads are damaged and must be replaced.
A damaged latch could be the reason. It is more likely to happen if the latch is made of plastic, not metal. If the latch isn't catching or turning you can try oiling it first to see if it can help. If this doesn't work, you may have to replace the lock.
If the handle is damaged or broken, it may be difficult to use. If this is the case, it will be necessary to replace it with a new handle that matches the style of your sliding patio door.
If your patio doors are old and outdated or brand new, Feldco can help you get them back on the right track. We offer a wide range of high-quality patio doors in different sizes and styles. To find out more about our products, call us today! We provide services to Southern California homeowners, including Ventura County and Orange County.
Faulty Weatherstripping
If you're seeing light in windows and doors that are shut, or you feel a draft pushing against the door or window It's time to replace your weather stripping. These strips create a secure seal that keeps unwanted air, pests, and water from getting into your home. They also help keep your heated and conditioned air in, saving you money on energy bills year-round.
Depending on the age of your weather stripping it may have deflated, and lost its buoyant, positive seal. It is easy to identify this by putting a dollar bill under the seal at the top and bottom of the jamb and the door frame where they meet. If the dollar bill slides easily between the seal and the door then it's time to replace the weather stripping.
It's tempting to remove only the worn section of weather stripping to replace it, but this can leave cracks on each side of the new stripping and could cause problems with the seal in the future. It is much more effective to replace all the stripping. This will allow you to be sure that your door will be properly sealed.
Follow our DIY guide for weather stripping to put the correct ma
