At first, I appology my poor English and I am a non-proessional on mathematics and programing. I am an old retired engineer/researcher.

I found strange phenomena with maple.
Could someone please verify this result?
This is sound like a stupid joke.
This queation is related to factorization of composite number N=p*q
p, q are large prime number respectively.

Degits:=200;
1.    Let p is large prime such as 50 degits
2.    Let R is small integer such as 3
3.    Let q is nearest prime R*p
4.    Let N=p*q
5.    Let f=frac(N/(q+s))

j:=1;
m:=2^b*2^c;
r:=m/2^b;
b:=8; c:=0;
F:=[ ];
for s from -m to m by r do
f:= frac(N/(q+s));
      if f=0 OR 1.0 then f:=100000; # zero dev exeption;
      elif f <= 0.5 then f:=log10(f);
      elif f > 0.5 AND f < 1.0 then f:=-log10(1.0-f);
      else print(“error”) break;
      end if:
F:=[F[ ], [s, f]];  # maple plot format
j::=j+1;
end do:

6.    Draw a Graph s vs F

You wil find a oscillating graph with step at s=0;

7. b:=8 and c:=75; and try same caluclation.

You will find a graph with dip at s=0;
Caution! Resolution and Scanwidth can not go together.

8.    Let qx=q+10^25;
9.    Nx:=p*qx;
10.    Let ps:=sqrt(N/3.0) and let qs:=3.0*sqrt(N/3.0);
11.    fs:=frac(Nx/(qx+s));
Caution!  Nx not equal Ns:=p*qs
12.     Draw a graph s vs Fs with Nx, p, qs
You will find a similar graph dip point shifted from s=0
13. Verify qx=ps-dip point s

My questions are
1.    Is it a kaind of factorization of Nx?
2.    This phenomena hava posibirity to make a vulneravility for RSA crypto?
3.    Power spectrum of F( c=0) indicates R=q/p; with an peak
4.    Is it an rediscovery of “Wheel”?  Are thea any papers similar to this phenomena

I appreciate to read this questions.

Environment: Windows 10 for workstation and Maple 2019(64bit) CPU: Intel Xeon.

15 Dec 2019  some miss spelling corrected

                       A graph added   frac(N(q+s)) vs s b=8 c=75 

Dear maple user ,while solving the system of pdes i am getting the errors and unable to plot the curves. please help me to  rectify the errors and  plot the curves.

Thanks in advance

restart;
with(PDETools):
G:=1300:beta:=0.0075:epsilon:=4.9*(10)^(-6):Pa:=100:alpha:=24:Pv:=97:
sys1:= {G*(beta^2*u(r,z)*diff(u(r,z),z)+v(r,z)*diff(u(r,z),r)) = -diff(p(r,z),z) +beta^2*diff(u(r,z), z$2)+diff(u(r,z),r$2)+(1/r)*diff(u(r,z),r),G*(beta^2*u(r,z)*diff(v(r,z),z)+v(r,z)*diff(v(r,z),r)) = -diff(p(r,z),r) +beta^2*diff(v(r,z), z$2)+diff(v(r,z),r$2)+(1/r)*diff(v(r,z),r)-(v(r,z)/r^2),beta^2*diff(u(r,z),z)+diff(v(r,z),r)+(v(r,z)/r)=0  }:

IBC:=(D[1](u))(0, z) = 0,v(0,z)=0,phi*(D[1](u))(1, z)+u(1,z) = 0,v(1,z)=epsilon*(p(1,z)+(Pa/alpha)-1),p(r,-1)=0,p(1,z)=(Pv-Pa)/alpha:
sol := pdsolve(sys1, IBC, numeric):
r:=0:

p1 := sol:-plot(u(r, z), phi = 0, numpoints = 100, z = -1 .. 1, color = ["Blue"], legend = ["u(r,z)"]):

p2 := sol:-plot(u(r, z), phi = 0.15, numpoints = 100, z = -1. 1, color = ["red"], legend = ["u(r,z)"]):

p3 := sol:-plot(u(r, z), phi = 0.4, numpoints = 100, z = -1 .. 1, color = ["green"], legend = ["u(r,z)"]):

plots:-display({p1, p2,p3});

"a=4 x+1/diff(f(y),y)";
b := 3*(4*x + 1)/(diff(f(y), y)*(3*x + 1));
subs((4*x + 1)/diff(f(y), y) = a, b);
 

I am trying to figure out which computational method is used in function Issimilar, (which determines similarity of matrices) in Maple 2018 and whether or not its a rational one.

how can i use curve fitting tools for get m and n in this equation  for excel data

equation

i want to get m and n?

New_Microsoft_Excel_Worksheet.xlsx

How would one code a real time clock (digital's the easiest - of course, or analog) within maple?

Hi,

Why extracting the features of the events doesn't return the good results when executed within a loop (see the pink test) ?

Thanks in advance.

PS: please, spare me  replies of the type "you can solve this equation formally"

 

Download Incomprehensible.mw

Dear experts

I am using Maple to solve a complex equation. My idea is to separate real and imaginary parts and then solve a set of the equation when both real and imaginary parts are zero. the following are the equation and the way I made real and imaginary parts;

eq:= (K*( Q*sinh(K)*cosh(Q)-K*cosh(K)*sinh(Q))*(1+s*K^2)+p*(-4*K^2*Q*(K^2+Q^2)+Q*(Q^4+2*K^2*Q^2+5*K^4)*cosh(K)*cosh(Q)-K*(Q^4+6*K^2*Q^2+K^4)*sinh(K)*sinh(Q)))/(K^2*Q*cosh(Q)):

so the K and the Q are both complex variables and p and s are constant.

K:=Kr+I*Kim;

Q:= sqrt(K^2-I*h^2*2*Pi/1e-6);

therefore the real and imaginary parts of the equation are 

finally, I tried to solve it as following

sys:={eval(A,[p=nu^2/g/h^3,s=sigma/rho/g/h^2])=0,eval(B,[p=nu^2/g/h^3,s=sigma/rho/g/h^2])=0}:

sol2:=fsolve(sys,{Kr=0..5,Kim=0..5},maxsols=5);

the problem is that Maple can not solve it and returns the command. I  know that there is solutions. How can I solve this equation?

the maple file is attached.mapleprime.mw

==============================================================

I guess Maple use Newton method to solve equation or system of equations. Is there an alternative? I mean what are the possible methods?

Hello users. I have a question on my work.

I'm trying to construct the equation and plot it. And I got 2 errors(warning).

Please help me how to solve this problem check the image below and attached file.

Question_plot_the_curvature.mw

Hello,

I am trying to pass the graphics to .txt format so that I can plot them in Origin (OriginLab).

npontos := 10;
dt := 0.02;
fd := fopen("out.txt", WRITE);
for i from 0 to npontos do
    t[i] := i*dt;
    PA[i] := x[i](t);
    printf("%e %e\n", t[i], PA[i]);
    fprintf(fd, "%e %e\n", t[i], PA[i]);
end do;
0.000000e+00 

Error, (in fprintf) number expected for floating point format
fclose(fd);
npontos := 10;
dt := 0.02;
fd := fopen("out.txt", WRITE);
for i from 0 to npontos do
    t[i] := i*dt;
    PB[i] := x[i + n](t);
    printf("%e %e\n", t[i], PB[i]);
    fprintf(fd, "%e %e\n", t[i], PB[i]);
end do;
fclose(fd);
0.000000e+00 

Error, (in fprintf) number expected for floating point format
npontos := 10;
dt := 0.02;
fd := fopen("out.txt", WRITE);
for i from 0 to npontos do
    t[i] := i*dt;
    qA[i] := x[i + 2*n](t);
    printf("%e %e\n", t[i], qA[i]);
    fprintf(fd, "%e %e\n", t[i], qA[i]);
end do;
fclose(fd);
0.000000e+00 

Error, (in fprintf) number expected for floating point format
npontos := 10;
dt := 0.02;
fd := fopen("out.txt", WRITE);
for i from 0 to npontos do
    t[i] := i*dt;
    qB[i] := x[i + 3*n](t);
    printf("%e %e\n", t[i], qB[i]);
    fprintf(fd, "%e %e\n", t[i], qB[i]);
end do;
fclose(fd);
0.000000e+00 

Error, (in fprintf) number expected for floating point format
npontos := 10;
dt := 0.02;
fd := fopen("out.txt", WRITE);
for i from 0 to npontos do
    t[i] := i*dt;
    Tg[i] := x[i + 4*n](t);
    printf("%e %e\n", t[i], Tg[i]);
    fprintf(fd, "%e %e\n", t[i], Tg[i]);
end do;
fclose(fd);
0.000000e+00 

Error, (in fprintf) number expected for floating point format
npontos := 10;
dt := 0.02;
fd := fopen("out.txt", WRITE);
for i from 0 to npontos do
    t[i] := i*dt;
    Ts[i] := x[i + 5*n](t);
    printf("%e %e\n", t[i], Ts[i]);
    fprintf(fd, "%e %e\n", t[i], Ts[i]);
end do;
fclose(fd);
0.000000e+00 

Error, (in fprintf) number expected for floating point format

trabalho_final_2019.mw

Hello,

I want to write a code about numerical solving N(for example N=150) coupled differential equations (ODE ) with M boundary conditions in Maple but I do not know how to do it and I cannot find anything useful. in particular, I have trouble inserting boundary conditions which are a lot for N coupled difrential equations.

Does somebody have a code script on this matter? please let me know.

Thanks a bounch in advance.

I would like to know how to create a group with some elements (numbers) {1,2,4,...} with a defined operation on it like X_42 (modular  multiplication by 42).

Hi everyone:

I'm going to write code to give me the following matrix A?

Hello everyone, thank you in advance

I am trying to plot two functions in the same graph. I didn't realize how to copy the real functions here but:

At the same 3D plot

I need to use the function F1(x,xi,k,B) for values of x*xi <6  and other function F2(x,xi,k,B) for values of x*xi  >= 6

Thank you again and sorry for my rusty English.
 

I attached a file with these 2 functions Functions_MAPLE_PLOT_TOGETHER.mw

What is the command to yield the expansion of Z^N in terms of x and y.

Z complex = x+iy,

N integer >1

e.g. Z^2 = x^2 - y^2 + 2.i.x.y