When using Maximize, is it possible to now what parameter settings that resulted in complex numbers?

KR Fredrik

Maximize(Eq1_new, {R_K*rho*`&sigma;_K`+R_S*`&sigma;_S` >= .38780613588076011954, r_K*rho*`&sigma;_K`+r_S*`&sigma;_S` >= .21290471165685214846, R_K*rho*`&sigma;_K`+R_S*`&sigma;_S` <= .38780613588076011954, r_K*rho*`&sigma;_K`+r_S*`&sigma;_S` <= .21290471165685214846});

Error, (in Optimization:-NLPSolve) complex value encountered

intsolve(int(f1(u)*(x-y), u = a .. b) = (12)*cos(x)+5*x^2-12, f1(x));I try to resolve the integral equation but i received all the time the followinf message error 

Error, (in intsolve) invalid input: rhs received {f1(x) = ?}, which is not valid for its 1st argument, expr
I try to use different form but i do not how to resolve the help center do not help to much.

I preciate any help thanks

Which book is the starting point and have examples

Hi.

please, I need some code about stepsize adaptative Runge Kutta method ( any order ) or other methods.

Thanks

I am trying to produce an animation. Everything seems correct, but the evaluation is taking a very long time. Even after an hour, it still tries to crank out a graph for me. I even tried to truncate the integral!

Here is my code.

with(plots):

z:= x -> 2*(int((sin(2*y)-sin(y))*cos(y*x)*exp(-y^2*t)/y, y = 0 .. 200))/Pi;

animate(plot, [z(x), x = 0 .. 10, y = -.1 .. 2], t = 0 .. 1, frames = 100);

Would could be the problem? 

Hi all

How to read a value from keyboard of PC when executing a maple document and assign it to a variable ?

Thanks

Dear the specialst in programmation, please I need to put a conditon if in this procedure with this form: Can you correct me this code please. Thank you.


aaa:=proc(x,y,f,N)
local bb,
for i= from 1 to N do

bb[i]:=f(x[i],y);

if bb[i]<=2 then y:=3*x[i] else y::=x[i]^2end if ;

end do:

end proc

> with(DEtools);
> L := -1.576674; MU := 0; DE13 := {(D(x))(t) = x(t)*(1+4*x(t)*x(t)-y(t)*y(t))+MU*y(t)*(x(t)*x(t)-.43*y(t)*y(t)-L), (D(y))(t) = y(t)*(1+x(t)*x(t)-.5*y(t)*y(t))+MU*x(t)*(x(t)*x(t)-.43*y(t)*y(t)-L)}; DEplot(DE13, [x(t), y(t)], t = 0 .. 20, [[x(0) = 0.1e-1, y(0) = .99], [x(0) = -.1, y(0) = -.9], [x(0) = 1.1, y(0) = 0], [x(0) = 0, y(0) = .2], [x(0) = 0, y(0) = .6], [x(0) = .6, y(0) = 0], [x(0) = .75, y(0) = 1], [x(0) = .1, y(0) = .1], [x(0) = .5, y(0) = 1.0], [x(0) = -.5, y(0) = 1], [x(0) = .5, y(0) = -1], [x(0) = -.5, y(0) = -1], [x(0) = -0.1e-1, y(0) = .99], [x(0) = 0.1e-1, y(0) = -.99], [x(0) = -0.1e-1, y(0) = -.99], [x(0) = .5, y(0) = -1], [x(0) = -.5, y(0) = -1], [x(0) = 0.1e-1, y(0) = .9]], stepsize = 0.1e-1, scene = [x(t), y(t)], title = "phaseplane 3 prime plot", linecolor = black, thickness = 1);
-1.576674
0
/ / 2 2\
{ D(x)(t) = x(t) \1 + 4 x(t) - y(t) /,
\

/ 2 2\\
D(y)(t) = y(t) \1 + x(t) - 0.5 y(t) / }
/
Warning, plot may be incomplete, the following errors(s) were issued:
cannot evaluate the solution further right of .93908020e-1, probably a singularity
Warning, plot may be incomplete, the following errors(s) were issued:
cannot evaluate the solution further right of .26367741, probably a singularity
Warning, plot may be incomplete, the following errors(s) were issued:
cannot evaluate the solution further right of .23463732, probably a singularity
Warning, plot may be incomplete, the following errors(s) were issued:
cannot evaluate the solution further right of 1.7040014, probably a singularity
Warning, plot may be incomplete, the following errors(s) were issued:
cannot evaluate the solution further right of .62484768, probably a singularity
Warning, plot may be incomplete, the following errors(s) were issued:
cannot evaluate the solution further right of .62484768, probably a singularity
Warning, plot may be incomplete, the following errors(s) were issued:
cannot evaluate the solution further right of .62484768, probably a singularity
Warning, plot may be incomplete, the following errors(s) were issued:
cannot evaluate the solution further right of .62484768, probably a singularity

what do i need to do so there are no more singularites?

i cant find the error the program is saying i have 

> L := -1.576674; MU := 0; DE13 := {D(y)*t = -x(t)*(1-2*x(t)*x(t))+MU*y(t)*(x(t)*x(t)-3*y(t)*y(t)-L), (D(x))(t) = y(t)*(1-y(t)*y(t))+MU*y(t)*(x(t)*x(t)-3*y(t)*y(t)-L)}; DEplot(DE13, [x(t), y(t)], t = -20 .. 20, [[x(0) = 0.1e-1, y(0) = .99], [x(0) = 0.5e-1, y(0) = .95], [x(0) = .1, y(0) = .9], [x(0) = 0.4e-1, y(0) = .96]], stepsize = 0.1e-2, scene = [x(t), y(t)], title = "phaseplane plot", linecolor = black, thickness = 1, number = 1000);
 
Error, (in DEtools/DEplot/CheckInitial) too few initial conditions: [x(0) = 0.1e-1, y(0) = .99]

it might be hard to read but if someone could help me it would be very appreciated 

int(BesselJ(2, r*k)*BesselJ(1, 1500*k), k = 0 .. infinity);

(of course, calculated numerically) against r=0..40 ?

PS. It is possible in Mathematica 9.0.1.0 .

I have a procedure which give an approximate solution for ode.

This our procedure

RKadaptivestepsize := proc (f, a, b, epsilon, N).

It's working ( afther some 3 mistake found by a member in Mapleprime).

Then I would like to compute the error between exact and approximate.

RKadaptivestepsize: compute the approximate solution

analyticsol: analytic solution

## here, I compute the error
for N from 2 by 2 to 500 do
dataerror:= N->evalf(abs(RKadaptivestepsize(f,0,1,epsilon,N)[1+N][2]-(eval(analyticsol, x = 1))));
##  sequence of data error
data[error] := [seq([N, dataerror(N)], N = 2 .. 500, 2)]:
if  data[error][k][2]<=epsilon then   
printf("%a  is the number of steps required using 3-step Runge Kutta Method to achieve an  eroor of 1e-6 .", k)
break ;
end if;   
end do;
end do;

But its gives an error.: Error, reserved word `error` unexpected

Have any one an idea.

Hello,

I am having trouble using the programmer entry point interface to convert/parfrac. As an example consider : While

> convert([x, [I*(x+I), 1]], parfrac, x);                   

         [-I, [(I + x) I, -I]]

correctly computes a partial fraction decomposition, the equivalent input

> convert([x, [I*x-1, 1]], parfrac, x);  

results in the error message (both in Maple 16 and 17)

Error, (in convert/parfrac) denominator factors must be coprime

which does not make any sense to me, since there is only a single denominator factor present (and it is even the same factor as in the previous call, only written differently).

What is the reason for this behaviour and how can I use convert/parfrac in a way that avoids such errors?

Thanks,

Erik

I am trying to numerically evaluate the following integral

I have currently used the maple commands

int(exp(10*(-2*y^2+y^4))*exp(-10*(-2*z^2+z^4)), [z = -infinity .. y, y = -1 .. 0], numeric)

evalf(int(exp(10*(-2*y^2+y^4))*exp(-10*(-2*z^2+z^4)), [z = -infinity .. y, y = -1 .. 0]))

evalf(Int(exp(10*(-2*y^2+y^4))*exp(-10*(-2*z^2+z^4)), [z = -infinity .. y, y = -1 .. 0]))

but all of them return the integral unevaluated. Any help?

Hello

I'm doing some calculation reports in maple. These reports are to be submitted to various classification societies - which all have different requirements to the calculations.

I would like to make a report, where the class specific calculations would be append based on a selection of class in the main calculation.

How do I do this?

If I was using latex, matlab, APDL or something like that, I would do and *IF Class=class1, *INPUT class.calc, *ENDIF, but how to do this in maple?

Hi

I need a temperature distribution inside a barrier during a heating process.
I will be appreciated for any help.

wz

Download heating.mw