Hi!

I am new to Maple and have a problem I've been struggling with all day.

I have a pendulum and need to find a equation of motion in the y-direction. Please find my code in the picture below.

I can see that my problem starts at Eqy where the differentiation deletes one of the right-hand-side parts because I don't have any function y(t), and Maple thinks y(t) a constant (?)
Can somebody please tell me what I'm doing wrong?

Thank you in advance!

This is my code for the Extended Euclidean Algorthim which should return integer l, polynomials pi,ri,si,ti for 0<=i<=l+1. And polynomial qi for 1<=i<=l such that si(f)+ti(g) = ri and sl(f)+tl(g)=rl=GCD(f,g).
The problem is, I keep getting division by zero. Also it evaluates pi = lcoeff(ri-1 - qiri) to be zero, everytime. Even when I remove this it still says there is a division of zero, which must be coming from qi:=quo(ri-1,ri, x); however I do not know why considering the requirements for the loop are that r[i] not equal zero. I really could use a fresh pair of eyes to see what I've done wrong. Any help would be greatly appreciated!!

Hi there,

Is there a way in which i can solve the following optimal control problem numerically with Maple?

 dH/dt=λ-µ H-(1-u1)β H V+δ I,

dI/dt=(1-u1)β H V-σ I,

‎dV/dt=(1-u2)k I-γ‎V,

dλ1/dt=-1+λ1µ+β‎‎V(1-u1)(λ1-λ2),‎

dλ2/dt=λ1δ+λ2σ-λ3(1-u2)k‎,‎

‎dλ3/dt=β H(λ1-λ2)(1-u1)‎‎+λ3γ.

where

u1=βHV(λ1-λ2)/A1,

u2=-λ3kI/A2,

σ = α + δ,

and

H(0)=1.7*10^8,    I(0)=0,    V(0)=400.

λ=5*10^5,    µ=0.003,     β=4*10^(-10),    α=0.043,    δ= 0.2                  k=6.24,       γ‎=0.65.

A1=900, A2=1000.

Answers and advice are very appreciated. 

Thank you all for reading.

Aylin

I got a problem with a difficult ode,the commands are below.

restart;
sys := 1.*(diff(x(t), t, t)) = piecewise(b(t) = 1, 0, 1003.0-1000.*x(t)-30.*(diff(x(t), t))-25.*signum(diff(x(t), t)-.1)-.3*signum(diff(x(t), t))*exp(-2*abs(diff(x(t), t)))), x(0) = 1, (D(x))(0) = 0;
mu := 100;
stick := [diff(x(t), t) = .1, b(t) = piecewise((1000.-1000.*x(t))^2 < 10000, 1, 0)];
slip := [[0, 10000 < (1000.-1000.*x(t))^2], b(t) = 0];
sol:=dsolve({sys,b(0)=0},numeric,discrete_variables=[b(t)::float],events=[stick,slip],event_maxiter=1000000,output=listprocedure,maxfun=0,range=0..8);

any advice is appreciated.

I have to calculate the data in JSON format and export the result back to JSON.

It would be greate if there is any JSON package for Maple.
---

Also, I use`ExportMatrix` to export the result to CSV format.

But there are some comma (`,`) in the result content and `ExportMatrix` does not handle it well.
Is there any solution for export data to CSV file in my situation?

Thanks.

Hi,

I need to build a multibody model in MapleSim 6.4 in which with few global parameters I can describe all the other parameters. In other words the final user will enter this few parameters, that are coordinates of specific points, and then the model will calculate all the relative distances on the base of those coordinates.

The problem is that if I apply trigonometric function and square root (like in the screenshot) the model is not calculating any value. Is it possible to make those calculculations?

this is the model (don't worry about the nonsense plots, it's because it's not ultimated):

DWS.msim

Thanks.

a+c^2

5*a+b^5

2*a+b^2*c+3*c

assume system of polynomials are above, how to test whether inverse exist

and find inverse of them

Let a planar polygon P without selfintersections be given through the plottools:-polygon command.
How to find its triangulation as a set of triangles (The indication of common sides is desired too.) in an optimal way with Maple? This is used in the finite element method.

properties of operations on sets?

Example:

is((A minus B) intersect (A minus C) = A minus (B union C)) assuming A::set, B::set, C::set;

                                                                  FAIL

how to calculate the RicciTensor for system of 3 polynomials equations in 3 variables

i find examples using differential expression, how to do for system of polynomial equations

Riemannian metric of constant sectional curvature

expect to test whether metric of constant sectional curvature g(t) = 1 when t tends to infinity or finite T

with(DifferentialGeometry):
with(Tensor):
DGSetup([x,y,z],M);
C1 := Connection();
R1 := CurvatureTensor(C1);
Ric1 := RicciTensor(R1);

sys := Diff(g(t), t) = -2*Ric1;

I have a large system of linear algebraic equations that I want to solve (2005 Unknowns, 2005 Equations). I was wondering that what are the proper commands to use in maple for solving the system as fast as possible. Take a look at the files in the download link if you want to see the system of linear algebraic equations.

http://pc.cd/h79

Please provide me any suggesitons that you may think will be helpful like using other sofwares that are good in doing this work such as MATLAB or something else.


Thanks in Advance

how to convert legendre polynomials into system of polynomials of 3 variables for drawing sphere with this ideal?

is possible to draw sphere from system of monomial polynomials?

Hi,

I have coded up a vector that is of my interest. The code runs witout any problem and gives me exactly what I want.

newtest.mw

All I want to know, is that if there are more efficient way to do so?

Any tricks, or better use of a particular function that I wasn't aware?

The only tiny bit of unsatisfactory is that, the (1-w) term is at the first term of the addition, is that possible to move it to the last term? Which is more conventional to read.

Thanks,

casper

Hello Dears

I have this equation

                                          (Napla)^4 * F(x,y) + k^2 *  (Napla)^2 * F(x,y)= 0,      (1)

which may be written as a non-homgeneous Helmholtz equation as

                                          (Napla)^2 * F(x,y) + k^2 * F(x,y)= g(x,y),                (2)

where the function g(x,y) is a harmonic function and (Napla)^2 is the laplace's operator in two dimension.

Can Maple solve equation (1), it will be better. If not may be solve equation (2).

how to calculate the cobordism between two ideals