I wish to study the trend of medical consultations each day during six years. Thus I expect near 2200 datas to analyse.

But some parameters are to consider :

- I don't have yet the datas per day, but the mean is about 2 consultations per day

- as it is difficult to do more than 3 or perhaps 4 consultations during one day (9h30 am - 13h pm), the others if they exist will probably be seen the next day (aso if the next day 3 news consultations occured)

- then, I don't know actually (as I expect the datas or each day but don't have now these datas) if the better distribution will be simply follow a Poisson' law, or exponential, or negative binomial, ..

- do someone have a clue for the better law given what i said ?

Further, I don't have a stastic program especially used for time trend, excepting Systran 13, but I don't believe that this program can be used with a theoric model of distribution, I recall that it does usual tasks, autocorrelations, saisonnal adjustments, .. but with continuous distributions I believe, and a linear model (removing the basic frequencies)

As such program (study of temporal series) is usually sold about 3000$ in France, that I don't expect to be a trader, with only one calculus to do, could anyone tell me how to adjust the better model to the 2200 datas that could be expected ?

Thx for your help, friendly yours;

Milos

I wonder why the thole procedure becomes ... when converting from 1-D math to 2-D math.

hi...please help me for solve this nonlinear equations with pdsolve

thanksoffcenter2.mw

Download offcenter2.mw

I tried to use a for loop to assign the bounds for creating an RTable in a Maple C wrapper (actually it does not matter what I do here). I checked that the for loop syntax is correct C syntax, for example even as simple as for (int i = 0; i < 2; i++){...} but the loop becomes an infinite loop and takes forever to run. Has anyone encountered the same problem as I did

 Hi everybody,

Until recently I was using Maple 2015.0 on this PC :

Windows XP
2 dual core proc Intel(R) Xeon(R) CPU E3-1225 V2 ; 3.19 GHz
64 bytes,
16 Go RAM

For two days now I am using Maple 2015.0 on this one

Windows 7
4 dual core proc Intel(R) Xeon(R) CPU 5-2637 V3 ; 3.50 GHz
64 bytes,
64 Go RAM

Comparisons of the running times for exactly the same code, consisting in 10000 independent Monte Carlo  simulations distributed over all the nodes (resp 4 and 8) give :

Windows XP :  504 sec  (with a variation of the order of  +/- 3s for different replicates)

Windows 7   :  343 sec  (with a variation of the order of  +/- 3s for different replicates)

The expected running time should be 504 * (3.2/3.5) * (4/8) = 230 s
(or 504 * (4/8) = 252 s if you neglect the acceleration due to the clock rate)
The realized running time (343 s) is thus at least  40% larger than the expected one.


Does anybody has already observed this kind of performance loss during XP -> 7 migration ?
Are there some comparisons of cpu times between Windows XP and 7 ?


Thank you all for sharing your own experience.



postscript : a NOTIONALexample of how the computations are distributed is given below

NbOfRuns := 10000:

# Data is a Matix(NbOfRuns, NbOfCols, …) constructed elsewhere

NbOfNodes := Grid:-NumNodes():
NbOfRunsPerNode := NbOfRuns / NbOfNodes:
for k from 0 to NbOfNodes do
   FirstData := 1 + k * NbOfRunsPerNode:
   LastData := (k+1) * NbOfRunsPerNode:
   Grid:-Run(k+1, MyCode, [Data[FirstData..LastData, ..], …])
end do:

I'm trying to view the source of the webpage fuelsonline.ca

I used HTTP[Get] like I did before which doesn't retrieve much of anything useful.  I thought of the sockets package which I can't seem to pull any information from.  Then I had an idea and viewed the page source which finally has information I can use if I can get Maple to read it in.  If I can get Maple to pull in the contents of the page source I should at least be able to carry it from there. 

Any ideas from anyone?

Hello, I run Maple to solve Binary Integer Programming problem which contain about 1340 constraint and its goal to maximize the objective function.

At first, it's running for 2 hours and said that the iteration limit was reached. So I try to add 'iterationlimit' at LPSolve opts and set it to 10000, but after 3 or 4 hours it said that the iteration limit was reached. So I set 'iterationlimit' to 100000000 and now Maple keep evaluating more than 12 hours.

I run Maple at my notebook with these spesification:

Processor: Intel Corei3-5005U 2.0 GHz

Memory: 4GB RAM

Windows 10

It is normal? Or I must run Maple in higher notebook spesification?

Thank you in advance.

Below is my Maple file, hope you can help me.

ISL_2017_FASE3.mw

I am a beginner with Maplesoft.

I have a data file with several devices IDs and links between these devices (more than 5000 links). For representing a network in Maple, I am aware that the GraphTheory package should be used. The vertices and edges are to be defined and the graph to be displayed.

The examples that I have looked at do not have such a large number of links. With more than 5000 links in the data file, I am not sure how to proceed further.

Any help or pointers would be highly appreciated.

Hello all,

I've been writing this procedure and it all works apart from the final sequence. I don't know why the final sequence doesn't input a number. Any suggestions? Thank you in advance!

Gambia ManTest_2.mw

In my study, I often need to verify that two operator is symmetric i.e. [P,Q]=PQ-QP=0, where A and D are operator polynomial such like  D²+4u+u_xD^-1 multiply with D³+uD+u_x,where D is differential operator.

I tried to use the Ore_package which can easily deal with the operator polynomial without integral(i.e. D^-1 term), so in my case , how to deal with operator with both differential and integral?

Wondering if anyone has created a Maple "front end" for handling SLAB calls.

Hello guys, i would like to do parallel computation in my code written in the Maple18. The question that can help me is:

Given a procedure that compute an function g, where g = f1+f2+f3+f4+f5+f6+f7+f8, i would like to compute all fi at same time.
Now, i´m using " grid:-seq('f[i]',[i=1,2,3,4,5,6,7,8])" and it works very well. However, i think that for my case an better solution should be;
Calculate the f1 in core 1, f2 in core 2, f3 in core 3 ... f8 in core 8 at same time, and after this, to sum all results(f1+f2+f3+..+f8). How i can do this?

Att,

Griffith.

This code error import com.maplesoft.externalcall.MapleException in java?

Please help me.

http://www.maplesoft.com/support/help/Maple/view.aspx?path=OpenMaple/Java/Examples

I was trying to call a C shared library which calls a Python function. I got the following error:

Error, external linking: error loading external library

/directory/of/my/library/libbe.so: libpython2.7.so.1.0: cannot open shared object

file: No such file or directory

Since I was running this using a pbs file, I made sure that I exported LD_LIBRARY_PATH (to libpython.so) inside the specific node. Does anyone have ideas on why this happens? Thank you!

Hey there,

I am using the fsolve command in order to solve numerically a system of equations with N equations and N unknowns. According to my discretization the number of equations changes. If I have a small number of equations it all works out perfectly. But if I increase the number of equations I just get something like that:

Sorry, for the long post, but for a small number of unknowns Ai it works. It seems that maple doesnt try to compute? Has anyone encountered the same problems?

Any help is appreciated.

Jens