Могу ли я использовать Клен, чтобы найти конкретные решения, которые выражаются либо в начальных и эллиптических функций для систем обыкновенных дифференциальных уравнений. Например, вы можете получить в Maple решений (sub_Solve01, sub_Solve02) для систем, которые перечислены в файле?
exp01.mw

I have a system of pdes and solved numerically using pdsolve (numeric) command.

The system consists of four first order partial differentia equations.

for example u(x,t), R(x,t)....

what command should I give to the Maple and get the graph of u(x,t) at a specific point x_0?

For example, I need a plot for u(30,t).

Is it possible with the maple plot?

I really appreciate your help.

Thank you for reading this post. :)

So this is my minimal working code. Everything works, but I cannot get the arrow size fixed you can see the animation propperly. Adding wid=1/2 gives an error message.

Hi,

Is there a way to export worksheet to pdf format but not in A4 size since some lines are going beyond the page?

Download Question_algsubs_3.27.15.mw

Write a Maple code that performs the Gaussian elimination for an nxn matrix, converting it to an upper triangular matrix. 

(Hint: you will need to use three for .. do loops.)

I want to make the model which moves along the specific direction (translational), So I used the "prismatic joint" to give the direction that I want to enforce. However, "Prismatic joint" only offers the direction along the "X", "Y", and "Z" axes though I want to give other direction.

Is there any way to give the specific direction (vector) to make my model move in that way ?

hello

i have some problem when iuse the digital libray with the delay components:

i have this error: delay variable not found in dependent variable list, [`Main.TransportDelay1.x`(T)]

it seems that the delay function in the modelica language is not well treated in MapleSim . At this level:

equation
    y = if 0 < delayTime then if delayTime <= time then x_delayed else y0 else pre(x);
    x_delayed = integer(delay(x, delayTime));
end Modelica.Electrical.Digital.Delay.TransportDelay;

Thank you for your help.

Hi

I'm trying to use the command: DocumentTools[Retrieve](path,label), but i recieve the message "unable to retrieve label reference" no mather what i do. When i use the GUI: Insert - reference and get the value it works fine, but in that way I can't assign the value to a variable in the document.

here is an example:

The document i want to retrieve a value from:

restart;

a := 5;

#a gets the label (1)

The document i want to retrieve the value to:

restart;
with(DocumentTools);

path := FileTools:-JoinPath(["test.mw"], base = worksheetdir); = "C:\Users\Nicolai\CloudStation\Nicolai\Skole stof\Sem 7\test.mw"

Retrieve(path, "());
Retrieve(path, "(1)");
Retrieve(path, "a");

#None of the above works

Is it even possible to do such thing?

with best regards

Nicolai

Hi,

I tried to use the Finance package and got:

with(Finance):
Warning, some commands in the Finance package may not work on this platform
Y := ItoProcess(1.0, mu, sigma, x, t);

Error, (in Finance:-ItoProcess) external linking: error loading external library finance.dll: The specified module could not be found.

Is it me or my pc that is causing this?

Thank you.

Murray

Hi:

I would like to slightly modify the "Explore" command -- I find it extremely useful, but the layout often doesn't work well for me (my typical use case is say 12 plots with ~10 parameters that vary). The problem is that the default alignment the columns of the table that contains a matrix of plots is "Center" and my plots don't fit on the screen properly (no matter how I play with sizes, placement, etc) and I would like it to be "Left" aligned --- aligning things manually (via right click) after the explore command is executed is possible, but painful, given that I often change my code.

... bottom line is that I would like to be able to re-define the "Explore" command.

I tried doing so by first calling:
showstat(Explore);

... then removing all the numbers, renaming the proc to sat MyExplore, declaring it (i.e. so maple understands it) and for now using that instead of the old Explore in my program (with no actual code changes for now). The problem is that I get the following error:

Error, (in DocumentTools:-Layout:-Table) number of Column arguments, 3, exceeds total column span, 1, computed from Rows' Cells

I think, somehow maybe showstat is not showing the full thing? or maybe it is part of a more complicated module? or maybe by removing the numbers the formatting got screwed up (i was careful here)?

So my question:

How would I define my own function "MyExplore" that (for now) contains exactly the same code and functionality as the built-in "Explore"?

thanks!

I want to translate my maple code with matrice multiplication  to C code. But the command  "Multiply" cannot be translated. So I want to edit the function translation by myself. I use "AddFunction" command to create a new function  "Multiply" and want to specify its corresponding C code.

f := proc ()
local x,y;
x := Matrix([[1, 2], [3, 4]]);
y := Matrix([[1,3],[4,2]]);
Multiply(x, y);
NULL;
end proc;

LanguageDefinition:-Define("NewC", extend = "C", AddFunction("Multiply", [Matrix,Matrix]::Matrix,
proc (X, Y)
local a,b;
a := 2;
b := convert(a, string);
Printer:-Print("Mmultiply(", X);
Printer:-Print(",", Y, ")"); Printer:-Print("\n");
Printer:-Print("from", b, "to");
Printer:-Print(",", Y, "do") end proc, numeric = double));
Translate(f, language = "NewC")

But when I run it, the "Multiply" function cannot be translated.  The result is:

Warning, type signature [CodeGeneration:-Names:-ArrayType(integer,CodeGeneration:-Names:-ArrayRanges(1 .. 2,1 .. 2),CodeGeneration:-Names:-ArrayOptions()), CodeGeneration:-Names:-ArrayType(integer,CodeGeneration:-Names:-ArrayRanges(1 .. 2,1 .. 2),CodeGeneration:-Names:-ArrayOptions())] for function Multiply is not recognized
void f (void)
{
  int x[2][2];
  int y[2][2];
  x[0][0] = 1;
  x[0][1] = 2;
  x[1][0] = 3;
  x[1][1] = 4;
  y[0][0] = 1;
  y[0][1] = 3;
  y[1][0] = 4;
  y[1][1] = 2;
  Multiply(x, y);
  ;
}

I don't know why "Multiply(x,y)" cannot be translated.

If I put two "Multiply(x, y)" in the procedure, like this:

f := proc ()
local x,y;

Multiply(x, y);
x := Matrix([[1, 2], [3, 4]]);
y := Matrix([[1,3],[4,2]]);
Multiply(x, y);
NULL;
end proc;

LanguageDefinition:-Define("NewC", extend = "C", AddFunction("Multiply", [Matrix,Matrix]::Matrix,
proc (X, Y)
local a;
a := 2;
b := convert(a, string);
Printer:-Print("Mmultiply(", X);
Printer:-Print(",", Y, ")"); Printer:-Print("\n");
Printer:-Print("from", b, "to");
Printer:-Print(",", Y, "do") end proc, numeric = double));
Translate(f, language = "NewC")

THe result is:

Warning, cannot resolve types, reassigning x's type
Warning, cannot resolve types, reassigning y's type
Error, (in CodeGeneration:-IssueError) type 'Matrix' cannot be translated to target language

I don't know why type 'Matrix' cannot be translated.

Maplesim 7.0(1) installer looks for Maple 18 installation.  Will Maplesim work with Maple 2015?

If not, what is the expected date of making both products compatible?

Regards,

G

integral.mw

Hi all, I want the best for you.

I really have confused with this bad integral (HeunB)which I've got it 2 weeks ago from a solution by Maple 17. I should solve this one to solve the derivative of this too.

Help me please, I attached the attribute file.

Regards.